sinnlicht Report post #1 Posted March 27 Hi All, Trying to program an Icom R5 using ARC5 in order to be able to listen into wireless frequencies for interference etc. Does anyone have lectro block tables in csv or excel format (personally looking particularly for Block 21). Thanks RL Share this post Link to post Share on other sites
Eric Toline Report post #2 Posted March 27 Block 21 is 537.6 to 563.1 mHz. Share this post Link to post Share on other sites
sinnlicht Report post #3 Posted March 27 Hi Eric, thanks I know where to find the frequencies. I was hoping that someone had converted them to a table that can be programmed into a scanner. RL Share this post Link to post Share on other sites
Jim Rillie Report post #4 Posted March 28 Hi Eric, thanks I know where to find the frequencies. I was hoping that someone had converted them to a table that can be programmed into a scanner. RLShouldn’t be too difficult to set up a spreadsheet yourself.Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
sinnlicht Report post #5 Posted March 28 Dear Jim, of course. But if someone had already done it and posted that work here, all could be saved time who are looking for this. RL Share this post Link to post Share on other sites
Matthew Steel Report post #6 Posted April 17 OK, I looked through my stuff and found this file I did sometime. Only 100kHz tuning steps, but that's when you really want the hex codes and stuff anyway. No guarantees that it is totally accurate. LectrosonicsFrequencies.xls Share this post Link to post Share on other sites
