Eric Toline Report post #1 Posted December 14, 2017 When I try to attach pictures to a posting I get the following notice: "There was a problem processing the up loaded file -200" Tried on 2 different comps, same result. Quote Share this post Link to post Share on other sites
syncsound Report post #2 Posted June 2, 2018 getting the same thing myself. any progress on this? Quote Share this post Link to post Share on other sites
Jeff Wexler Report post #3 Posted June 2, 2018 There is a limit on the size of attachments (not sure exactly what the setting is now) so that may be the problem you are having. Take a look at the size of the image you are trying to post and if it is large (high resolution, etc.) you could try re-sizing it and then attaching. That's all I can suggest at the moment. Quote Share this post Link to post Share on other sites
Jim Feeley Report post #4 Posted June 2, 2018 I didn't have any problem uploading a picture a couple days ago in the Magliner thread. It was a PNG file; about 200K or so is my guess. So like Jeff says, try a different format or more compression to get the size down. Quote Share this post Link to post Share on other sites
Eric Toline Report post #5 Posted June 2, 2018 1 hour ago, Jeff Wexler said: There is a limit on the size of attachments (not sure exactly what the setting is now) so that may be the problem you are having. Take a look at the size of the image you are trying to post and if it is large (high resolution, etc.) you could try re-sizing it and then attaching. That's all I can suggest at the moment. You're responding now to post I put up in December of last year? Why? Quote Share this post Link to post Share on other sites
Jim Feeley Report post #6 Posted June 3, 2018 Been busy? Quote Share this post Link to post Share on other sites
Jeff Wexler Report post #7 Posted June 3, 2018 I was actually replying to someone named "syncsound" who posted a comment that followed your comment from 2014. I thought it was rather odd, a very old thread, but that's where he posted it. Quote Share this post Link to post Share on other sites
syncsound Report post #8 Posted June 3, 2018 I was searching the forum to see if anyone else had had the same problem and found a solution for it. I bumped Eric's thread (since he posted the actual error code) to see if it would get some attention. Side note: syncsound is Christian Dolan from Portland, OR. I also have a (neglected) blog called sync.sound.cinema where I used to write about sound for picture. I'll try re-sizing and see what that buys me. Thanks! Quote Share this post Link to post Share on other sites
Daniel Ignacio Report post #9 Posted June 4, 2018 After trying to upload some product images for my F8n topic, it seems that the limit is somewhere between 3.2 MB and 3.6 MB. Probably 3.5 MB! Quote Share this post Link to post Share on other sites
