Jump to content

saadasound

Members
  • Posts

    322
  • Joined

  • Last visited

Everything posted by saadasound

  1. I'm open to any light, honestly. as long as it's dimmable and bright enough. Cart isn't finished being constructed yet, but can attach in pretty much any way, but would prefer attaching to baby pins that will be on each corner of the cart top.
  2. I'm looking for a hinging or articulating arm long LED light bar to light my follow cart work surface. I've seen something from Chindha that would mount to a rack unit, but would need something bigger. Would be lighting a 36" wide work surface. I thought about using a piece of 8020 or a putting a channel in a nice piece of hardwood and gluing an LED strip light in it. Somehow inserting a 1/4 20 threaded insert and attaching to a cinearm or articulating arm. Any ideas?
  3. I'm interested in upgrading to a dante system and was wondering if anyone had any recommendations for certain dante workflows? How do you incorporate the system into your cart? Anyone using a remote setup running out to set? Pictures of setups maybe? Thanks so much!!! Steve
  4. So, I just put together this cart last week for a show I started this week. It's working pretty well so far, but the main issue is that its top heavy and the wheels don't seem to be spaced the right way in order to support the weight when pushing. Of course pushing from the smart wheels side is easier, but it's tough getting it moving from a static position. I was thinking to maybe outrig the smart wheels so they are a little further out from the base, as well as getting some larger back wheels to help getting over bumps and such. Anyone have and thoughts or ideas on how to get this done? Thanks so much! Steve
  5. I'm working on a follow cart and would love to add some inovativ grip handles that rotate. I'm waiting to hear from them to see what the diameter of the rods are on their carts to match, but was wondering if anyone has done this modification at all, or have made similar modifications with DIY handles? They would be attaching the the sides of a rack case.
  6. Thanks to everyone for their advice! I ended up going with a bunch of penn elcomm drawers. They were extremely helpful on the phone and were able to get all the drawers to me in 2 days with free shipping! I'll be building the cart on Monday, so we shall see how it all turns out. I'll be adding some rear supports for sure. I ended up going with 14" deep drawers since I don't need the 18", so gotta figure out how to support them. Info and photos to come! Steve
  7. I'm looking to build a rack case for my follow cart on an upcoming show and wondering if anyone would have anything bad to say about aluminum drawers? I know they will save me on weight, but do the hold up to heavy use like steel drawers do?
  8. I'm looking to set up a comms system for an upcoming shoot and was wondering if anyone can tell me if there's a product that allows you to have audio from zoom go through a walkie? I've seen pictures of some hardware but can't make out the branding.
  9. Got it. Is the license require the Part 74 License?
  10. If I'm reading the FCC guidelines correctly, is it true that there's a section of Block 25 that can still be used? Looks like it's open in the duplex gap (653mhz - 663mhz). If this is true, is it still worth holding onto or buying some systems in block 25, especially for IFB's where you only need one or two transmitters?
  11. I’m building a follow cart and was looking around for Rackman aluminum drawers with no luck. Forgive my ignorance, but are they still making stuff? If so, where can I purchase them? Thanks so much, Steve
  12. Thanks for all the thoughts! I was thinking about getting a stereo bar and setting up both a SM57 and a 50 for both loud and dialogue. Excuse my possible ignorance, but would it still be safe for the element of the 50 to be subject to all that loud signal?
  13. I'm working on a marching band documentary and focusing on the drum core. Spent a day shooting with them already and rolled with a sm57 on the boom and worked out pretty well for loud playing. However, we keep going from loud playing to talking softly. Outside of changing gain DRASTICALLY on a dynamic mic every time they stop playing and start talking, does anyone have any recommendations? I plan on having time to wire at least one person next time with a red dot mic, but there are a ton of subjects we want covered and I'd rather try to boom people. Thanks, Steve Saada
  14. I’m thinking about getting a src 941 for my bag, but trying to figure out how to set it up with my RF distro. I have the dual band PSC rf multi, but need to get antenna’s. Been thinking of getting the Shure “pipe bomb” antenna, which would cover everything I’d need, but would I need to add any filters to the line? I’d think the antenna coupler would filter them out. https://www.gothamsound.com/product/ua860swb-antenna Anyone have a bag set up with 941 and RF distro?
  15. I've had some success with sliding a hush lav onto the antenna. I cut/pull one hush lav in half and slide one down to the bottom of the antenna and leave one up at the top.
  16. I'm looking to upgrade my bag's wireless distro and looking for the right distro box. Anyone have any experience with the smaller BSRF or the PSC rf multi? I know the newer rf multi covers 941, but there aren't any antenna's I know of that cover both UHF and 941, skipping the in between cellular channels. I'll be using src's and 411's, for reference! Any advice would be greatly appreciated! Thanks, Steve
  17. I just got my part 74 license and I’m looking to get into block 941. Anyone have any good experience in the US so far in this block? Are there any antennas that cover 470-960? I know the new PSC rf multi has a new option that covers both 470-618 and 941-960, but not sure if anyone has used antennas with great results yet.
  18. Looks great! I'm assuming you have your comtek transmitter buried in the bag and extend it out to the front of the bag? How do you have it mounted on the front? Also, are you using the antenna distro as your bag power distro as well? Is the bag you're using the ktek junior?
  19. Looking to upgrade my bag’s RF distro and wondering what y’all do to keep things clean and efficient!
  20. I'm working a job that has a lot of standard interviews I'll be using my 50 on, but the client also wants to record a podcast style interview as well during a convention. I was thinking of just using 2 50's, but does anyone have any recommendations for better mic choices that may have better isolation? Thinking something cheap that I could potentially get at guitar center then return after using!
  21. Read the manual first thing, still chooses a mismatched frequency.
  22. Correct, that’s exactly what it’s doing. Did you figure it out in the end?
  23. I just got my SRC B1 and a SMWB B1, and trying to smart tune seems to always tune to a "mismatched" frequency outside the range of the transmitter. I also tuned on B1N and still tunes to mismatched frequency. Anyone have this same issue or know if I'm missing something? Also, It feels like the SMWB runs pretty low with COS11's... Had to have my gain on them set close to 35 to get movement on the SRC. THANKS! Steve
  24. Does anyone know when the TAI Audio sale on the Betso TCX-2's ends?
  25. Hate to veer off this a little, but can someone tell me the differences in the mixpre10t and the 6 series? I get the streaming capabilities and what not, but outside of that, what's the difference?
×
×
  • Create New...