Jump to content



Recommended Posts

Hi all,
For those who need to deliver conform specs:
I've been working my butt off to get things easier:
My loudnessChange can now measure mono, stereo, 5.1 and 7.1
And it can correct if the loudness is wrong.

But wait, there is more!
It accepts inputs mono or poly, and you can output mono or poly (thus, interleave / de-interleave).

For non-interleaved output, you can decide the new track names, and auto place them in a subfolder if desired.
It can also remap if you go from L C R xxxx to L R C xxxx or alike, no matter the interleave in/ output.
Then, if you have stems, it can auto correct the stems based on the printmaster.
(that's not all, but I'll keep it short here.)

I think the accuracy is on par with the competition (or better), for a fraction of the cost.

But, to make it really great, the interface needs a bit of work. It's a mayhem of different formats to expect / output.
I could use some others to have a look at that.

If you feel to help, drop me a PM.



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...