NathanWBS Posted June 30, 2015 Report Share Posted June 30, 2015 We just received stock of them here in the UK. Has anyone tried them yet? Quote Link to comment Share on other sites More sharing options...
DyerEar Posted July 6, 2015 Report Share Posted July 6, 2015 I got a few packs through today. First impressions are nothing special to be honest. It may well be a technique thing - as although they have some instructions for use, there are a few vague areas... One thing I noticed - if you crush the fabric square between your fingers there is an audible 'crackling'. This is right next to any microphone placed in the cover - noisier than an overcover by a long way. The fabric is a synthetic with a softer 'foam' core with 2 porous surfaces. Also these don't seem to offer much if any wind protection. Maybe I've got it all wrong and someone from Bubblebee could advise on exact usage. The small square of fabric punched in the middle was removed in my use when removing backing (is this correct?) The tape is similar to any medical/toupee type tape I have used (it's double sided). It lost its tack fairly quickly and would need to be replaced as often as any other tape I'd say. It may be that these are easier to hide, but didn't notice any benefit to the sound of the mic. Cos-11, wisycom on a loose fitting shirt btw - in several 'usual' positions. Anyone else? Simon Quote Link to comment Share on other sites More sharing options...
NathanWBS Posted July 7, 2015 Report Share Posted July 7, 2015 I got a few packs through today. First impressions are nothing special to be honest. It may well be a technique thing - as although they have some instructions for use, there are a few vague areas... One thing I noticed - if you crush the fabric square between your fingers there is an audible 'crackling'. This is right next to any microphone placed in the cover - noisier than an overcover by a long way. The fabric is a synthetic with a softer 'foam' core with 2 porous surfaces. Also these don't seem to offer much if any wind protection. Maybe I've got it all wrong and someone from Bubblebee could advise on exact usage. The small square of fabric punched in the middle was removed in my use when removing backing (is this correct?) The tape is similar to any medical/toupee type tape I have used (it's double sided). It lost its tack fairly quickly and would need to be replaced as often as any other tape I'd say. It may be that these are easier to hide, but didn't notice any benefit to the sound of the mic. Cos-11, wisycom on a loose fitting shirt btw - in several 'usual' positions. Anyone else? Simon Hi Simon, Check out this video, it may offer some answers. Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted July 7, 2015 Report Share Posted July 7, 2015 The piece of fur is a great idea. I use it all the time. a lot better then Mole Skin. It is especially useful with shirts - between rubbing fabrics or especially between the skin and the shirt on the neck when the mic is in the collar. Quote Link to comment Share on other sites More sharing options...
GAGaudio Posted July 15, 2015 Report Share Posted July 15, 2015 The piece of fur is a great idea. I use it all the time. a lot better then Mole Skin. It is especially useful with shirts - between rubbing fabrics or especially between the skin and the shirt on the neck when the mic is in the collar. yea I've been thinking of this for a while! Ive been tapping together a couple of under covers to try and eliminates some noise but I'm so happy someone is coming out with a big piece of fur! Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted August 20, 2015 Report Share Posted August 20, 2015 (edited) Demoing BubbleBee Softie. I hope it works well because as of now there is no softie on the market that does good in medium wind... Edited August 20, 2015 by RadoStefanov Quote Link to comment Share on other sites More sharing options...
pindrop Posted August 20, 2015 Report Share Posted August 20, 2015 (edited) Demoing BubbleBee Softie. I hope it works well because as of now there is no softie on the market that does good in medium wind... The forum police are investigating a report of 'off topic' in this locality.... Edited August 20, 2015 by pindrop Quote Link to comment Share on other sites More sharing options...
James Arnold Posted August 20, 2015 Report Share Posted August 20, 2015 I got a few packs through today. First impressions are nothing special to be honest. It may well be a technique thing - as although they have some instructions for use, there are a few vague areas... One thing I noticed - if you crush the fabric square between your fingers there is an audible 'crackling'. This is right next to any microphone placed in the cover - noisier than an overcover by a long way. The fabric is a synthetic with a softer 'foam' core with 2 porous surfaces. Also these don't seem to offer much if any wind protection. Maybe I've got it all wrong and someone from Bubblebee could advise on exact usage. The small square of fabric punched in the middle was removed in my use when removing backing (is this correct?) The tape is similar to any medical/toupee type tape I have used (it's double sided). It lost its tack fairly quickly and would need to be replaced as often as any other tape I'd say. It may be that these are easier to hide, but didn't notice any benefit to the sound of the mic. Cos-11, wisycom on a loose fitting shirt btw - in several 'usual' positions. Anyone else? Simon I've just got a pack and have so far run to similar conclusions Simon. Needs proper testing, but to my ear the fabric is quite abrasive (even in the video the rep mentions the 'noisey' side - there shouldn't even be one of those!). Further fiddling needed. Quote Link to comment Share on other sites More sharing options...
RadoStefanov Posted August 20, 2015 Report Share Posted August 20, 2015 I've just got a pack and have so far run to similar conclusions Simon. Needs proper testing, but to my ear the fabric is quite abrasive (even in the video the rep mentions the 'noisey' side - there shouldn't even be one of those!). Further fiddling needed. I would not use that fabric. I use small fur instead like rycote over covers... Quote Link to comment Share on other sites More sharing options...
atheisticmystic Posted August 20, 2015 Report Share Posted August 20, 2015 Hi Simon, Check out this video, it may offer some answers. Cant say Im impressed with these mounting techniques, which most seem to be set up for loads and loads of outright contact noise. Im going to have to stick with my sammich, I use it for months, just adding new layers off stickit. best, steven Quote Link to comment Share on other sites More sharing options...
Richard Thomas Posted August 20, 2015 Report Share Posted August 20, 2015 Also recently found Bubblebee make these small cable strain reliefs:http://www.soundnetwork.co.uk/product/bubblebee-cable-saver-bbi-lcs-4bl/ Quote Link to comment Share on other sites More sharing options...
Christopher Salazar Posted August 24, 2015 Report Share Posted August 24, 2015 Also recently found Bubblebee make these small cable strain reliefs:http://www.soundnetwork.co.uk/product/bubblebee-cable-saver-bbi-lcs-4bl/ Those look great. I can't seem to find them in the States. Raycom has them but it appears they don't ship to the States. Any ideas? Quote Link to comment Share on other sites More sharing options...
NathanWBS Posted August 26, 2015 Report Share Posted August 26, 2015 Those look great. I can't seem to find them in the States. Raycom has them but it appears they don't ship to the States. Any ideas? Hi Christopher, Here is a link to a full list of resellers: http://www.bubblebeeindustries.com/buy/ Quote Link to comment Share on other sites More sharing options...
Christopher Salazar Posted August 27, 2015 Report Share Posted August 27, 2015 (edited) Hi Christopher, Here is a link to a full list of resellers: http://www.bubblebeeindustries.com/buy/ Thanks for that. I've been through that list - the U.S. resellers only stock the bubblebee lav cover. No worries. I'm sure I'll find the strain relief soon enough. edit: Matt at Pro-Sound hooked me up. Thanks Matt! Edited September 1, 2015 by Christopher Salazar Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.