Jump to content


  • Posts

  • Joined

  • Last visited

Profile Information

  • Location
  • About
    Location sound and post sound
  • Interested in Sound for Picture

Recent Profile Visitors

1,238 profile views
  1. Might be the Schoeps and nothing to do with the Tacit. Ive heard interference with Schoeps before Tacits were invented. If you removed the Tacit from the audio chain did the interference suddenly disappear?
  2. Are Rycote still improving the Tacit? or has the design settled down? I have noticed that just touching the plastic part of the XLR that screws into the back of the metal barrel creates noise so Im thinking I should send it back to see if something is loose inside. I have gotten interference also while using them with a Sennheiser 8050 so Im wondering if I have older versions (Shell to shell attached, as mentioned earlier in the thread). Is there a quick and easy way to check what version I have? Also did Rycote ever sell a barrel version of the Tacit? This was mentioned in the thread above but I've never seen it on their site or for sale anywhere... so perhaps that idea was scrapped?
  3. Got a link Joon or could you email me the information?
  4. Sound Devices fixed the problem after I sent the unit back and also posted a page on their site explaining this known issue with unbalanced devices.
  5. Thanks for your reply Nate - very helpful! Im going to run the smartView Duo on a separate hawkwoods battery pack so that its not in my audio chain. Have you ever had problems with bncs from the camera causing interference? I had terrible problems on a shoot recently and I think it was the bnc cable roll that the hire company provided for the director's monitors
  6. Hi, Im looking at buying a SmartView Duo, not the 4k, and Im wondering can I power it from an NP1 battery using a HawkWoods SQN4s? Im wondering if owners of the SmartView could tell me how long I would get before having to change battery? At the moment I only use NP1s so it would be handy to keep it that way if the SmartDuo isnt too power hungry and not have to buy a different type of charger and batteries. I'll buy a bigger battery for the new cart at some stage when I have time... Thanks for any tips!
  7. The unit is no longer holding its time code settings despite the blue flashing light and a battery attached which has a charge. This was all working fine before it was sent away for the mod 14.
  8. Shure UK modified my 664 under warranty so that inaudible noise (80khz) created when using unbalanced devices on its inputs no longer shows on the level meters. Since I got it back the spring device (Push to eject) on the SD card slot no longer works. It worked fine before it was sent off and had always worked fine. Normally you push the card and a spring pushes it out so that its easier to grab and take out but that spring no longer works since I got the unit back. If I push the sd card nothing happens so I have to remove the CF card in order to get a grip on the SD card. The 664 still sees the SD card and records to it and formats it but I am concerned that if part of the mechanism isnt working that part of it might come loose and which could mean the card gets stuck or that it blocks a card being inserted. Im thinking the only way that mechanism could have been damaged is if someone pulled the card out without pushing it in first to allow it to pop out itself. Has anyone else experienced this on their 664 or any other device using SD cards?
  9. Sound Devices have finally owned up to the fact that there is an issue with some of their range of 664s - check your serial as per this page: http://www.sounddevices.com/notes/mixers/664/664-xlr-ins-with-unbalanced-outs/
  10. Yeah is it the 664 in your mind you refer to? the one that works like a dream ... I mean is a dream.
  11. Its just wired as a balanced cable, no electronics added. Its mass produced so its not something you can open easily but you can use a multimeter to test continuity and know how its wired inside.
  12. Thanks for your clear and unabusive response Rick! So refreshing and helpful!! Im still trouble shooting this and would be interested from hearing back from owners of the 664 who use it with unbalanced input devices. Do you own the Sennheiser g2s and if you bought them new was the output cable balanced? I own 2 of the Sennheiser g3s and they ship with an unbalanced output cable called the CL100. Do you own a 664 and if so are you using any unbalanced gear with it? if so does it all work ok or are do you have to make modifications to allow it to work? My 664 has a problem with the unbalanced output cable from the g3 receiver and this manifests itself as a huge amount of noise on the channel. I think it doesn't like pins 1 and 3 being linked and creates a lot of noise on the channel. Using a balanced cable eliminates this problem. I can plug the unbalanced cable into an SQN mixer and none of the noise is present so it can handle an unbalanced input but MY 664 cant. It seems some other 664 owners have problems with unbalanced inputs and that a mod is needed so that makes me wonder if its just some 664s within a range of serial numbers that have a problem with unbalanced inputs? Sound Devices have been quick to suggest sending the unit back but have refused to tell me what they think is wrong and what they are going to do to fix it. I have a solution for using the g3s in that I now have 2 x balanced CL500 cables from Sennheiser which normally ship with their more expensive radio mics. I'd prefer if the 664 could handle unbalanced inputs with no problems like the SQN mixer could!
  13. Hi Mike I have a noise problem with my 2 Sennheiser g3s connected to my 664. Both my g3s arrived brand new with a unbalanced CL100 stereo locking minijack to male xlr cable. There is a blue rubber band around the cable which in very faint writing has CL100 written on it After some experimentation I conclude that my 664 doesnt like unbalanced cables though Sound Devices claim the 664 can take unbalanced sources on its inputs. If I only have this unbalanced cable plugged into the 664 I can see and hear noise on the channel - a lot of noise. Sennheiser ship their more expensive 2000 series with a balanced version of this cable which works fine with the 664 - No noise. These have an all metal xlr casing and the rubber ring has CL500 on it as opposed to the unbalanced cable which has a blue plastic part on the xlr connector and a light blue rubber ring which has CL100 on it. So the cable isnt the only problem here. The unbalanced cable caused no problems plugged into a SQN mixer which means that the 664 has a problem handling unbalanced inputs. Im not sure if all 664s have this problem or if its just a batch of them but I was surprised that Sound Devices suggested I send it back when I complained about the noise. They have so far refused to tell me whats wrong and what is involved in fixing it which I find dishonest. I was asking on another post about this in an effort to trouble shoot it and got abuse from various people for not knowing what was going on and not RTFM etc etc. There seems to be a lot of people on this forum who delight in giving out to people for not knowing something or tell them they should be away troubleshooting instead of asking on this forum, which I consider to be a part of troubleshooting!! I don't really like engaging with people who get a kick from spewing out abusive comments and feeling superior because they know something that someone else doesn't know. I find that anti-social and anti-educational. One of the principles of education is that "THERE IS NO SUCH THING AS A STUPID QUESTION"
  14. Rich. The gear is sitting in front of me and I know its mic out, I have a mic open and it sounds fine except for the noise floor. Output gain is zero and the options are a range between +12 to -30.
  15. Again, sorry for not being a real sound guy Mike. I must try harder. You are amazing and very real. Actually sorry for asking any questions as well Mike, I hope I didnt wake you or annoy you too much by not knowing something. You couldnt be wrong, never! True Im not a good troubleshooter or problem solver, im not good at anything. Do you feel better?
  • Create New...