Jump to content

Rafael

Members
  • Posts

    60
  • Joined

  • Last visited

Everything posted by Rafael

  1. I have exactly the same problem, have you solve it? any news? thanks !!
  2. Hi I’m about to do the next thing. I would like to modify my eSMARTG BG-DH power disto in order to feed it with an Aton Bauer VCLX I'm thinking to solder XLR4pin’s Male/female between the eSMART socket conector and the distributor To still using the eSmart bag batteries when I need any one has tryed something like this ? Any advice thanks!!
  3. Hi Trey, I like mine !!! but it,s broken unfortunately. I'll like to check before buy the second one if there are relevant differences on new models or brands, just checking.
  4. Hi! I need to buy another AMP for my zaxnet, I was using an Sunhans esunrc 3000 mW 2.4 GHz Just want to know if someone have a better alternative to this I seen there are other models on amazon, any advice? Thanks!
  5. Zephyx have a removable basket, so you can use it naked, inside cars, interiors or reduced spaces, piano or pianissimo have fix basket. the vertical distance is not a problem. I'm a Zephyx ccm ms user for many years with amazing results on the field, incredible wind protection. fully recommended !! Cinela also has an excellent customer attention , you can contact them for any replacement parts or doubts also they have _Kelly_ for rain situation something useful for designers. the very best!!
  6. +1 Jay Rose completely agree ! there are a lot off possibilities on glass fiber panel cut it, frame it and please cover it with something neutral grey, withe or black options to make photographers happie. share with you some tech data Safe use instructions lana-vidrio-eng_0(1).pdf
  7. Hi my kit it’s all Zaxcom and also block 23 I bought a used block 23 plexer one For 400CAD on very good shape if you are using only block 23 it’s not expensive and you have filters I also use hi and low freq zaxcom tx both of them on block 23 (on the overlapping frequencies) I’m happy and was a cheap solution. Sorry for my English Tha very best for you!!!
  8. Thanks! Unfortunately we are going alone it’s a very small documentary I also needed a replacement part for my zephyx ccm MS so finally I bought everything from udiosence and shipped to one person on Milan thanks for the info the very best
  9. Thanks to all I already tried with Nagrit with some lucky they answer my mail, very kindly they only can send it by DHL to the near deposit of DHL I'm not sure to have a car or time to go I´ll need the buy the boom in advance because i´ll go directly from the airport to the village? a friend ask my for one for him and its a favor (so i will travel without mine) I suppose it will be cheaper to find a local dealer. I´m wrong? going to try with the others thanks a lot! the very best
  10. Hi I´m about to travel to a small town near to Milan (3 hours) Italy I´ll need to buy a boom pole there, and also like to have a audio store contact for expendables or any inconvenience etc etc any recommendation ? will be awesome if can buy by phone or online and they shipping to the small town. I'll be 4 weeks there I´m looking for AMBIENT QXS 580 or GB2551L from Gitzo (Italian) Sorry for my English, thanks for reading ! The very best! Rafa
  11. 😂 true true but sounds like no other the mixer it's also an small option
  12. hi I think what you want it's provided from aeta on the mixy (3 chnls analog digital mixer ) The outer concentric control (of channel 2) provides +/-5dB adjustment of the balance in L/R mode (normal stereo), or the stereo width in M/S mode http://www.aeta-audio.com/fileadmin/downloads/pdf_uk/manual_mixy.pdf on the aeta 4 minx 6dB on the fader 2 http://www.aeta-audio.com/fileadmin/downloads/pdf_uk/manual_4MinX.pdf
  13. isn't the recorder’s body the ground plane of the antenna system ?
  14. was using audioroot BG-DH MKII power distributor and eHRS4-HRS4 regular power cable
  15. Excelente!!!!! some advices from my experience The Audioroot eLC-SMB charger features a battery wake-up function for fully depleted batteries..... but the first time doesn't worked to me the Audioroot dual charguer wake-up function worked fine!! other thing... can't power up my nomad with 45Wh audioroot with regular cable from Audioroot: NOMAD from Zaxcom are fitted with very large capacitors in their internal power supplies. When switching these units ON a very high inrush current occurs because of these capacitors. This inrush current is high enough to make the eSMART Li-45wh battery protection trip. This protection circuit is rated at 4A with inrush current capabilities of 10A for 31ms and 20A for 427us. Your problem can be solved by using a current limiting cable. We can provide this cable under reference eHRS4-HRS4-2.0 or eHRS4-OUT-5.0 depending on your setup (ie if you are using a power distributor to power your NOMAD). If you are used to building your own DC cables you can also simply build and HRS to HRS cable with a 1ohm resistor in series to power your NOMAD. The resistor will act as a current limiter and correct the issue you are currently experiencing. The very best!
  16. So ! what's my output power ? always 75mW ? Fixed thanks
  17. HI me too in an older version (V2-14) It's looks like it's working. at least they react at the same way of TRXLA's I'm confuse, it's working on the screen but not on the output power? How can I measure the output power? Thanks WhatsApp Video 2017-08-11 at 17.55.56(1).mp4 sorry for my poor English
  18. Rafael

    Mic plexer 2

    thanks all. the block 23 on micplexer2 it's on position 3, 582.5-617.5 center freq 600Mhz on my QRXs scan limit 590-614 should I think on a block 23 micplexer1? what do you recommend for run 4 systems ? on xr or stereo or mono (400Khz spacing) I'm used to work on quiet rf environment . plexer 1 or 2 ? can't find plexer1 user manual the best
  19. Rafael

    Mic plexer 2

    OK the manual said the" V filter will also allow the MicPlexer2 to cross blocks" can cross block 23 / 24 HI/low or I'm wrong ? thanks for your help
  20. Rafael

    Mic plexer 2

    Hi one question about mic plexer 2 can I set the variable filter to use it with 2 QRX200 one High (trxla2.5s) and one low (2 zmt3.6) ? is it possible ? make sence ? thanks
  21. Thanks ! Yes must be that But it's strange they made 2 custom cables wrong? One line level and one mic level ? the best !
×
×
  • Create New...