TommLab

Thanks Allen!!!

The caps look very nice. Was thinking about doing my own as well, what material did you print with?

Haven't bought one per se, but used one in a docu made for the cantar, equal to portabrace quality wise. Don't know about prices though

Was searching today new info and this popped up on zax website

A big Thank You

Mr Duffy is there an email address to which i can write to for suggesting this feature (better monitoring or a choice of monitoring) a second time? Wrote through the website but never got back any answer. Thanks

Lucky you rick, it has been weeks and i didn't get a reply about my suggestion on improved monitoring on 70D. Oh and i did too sent a request for take reset for 680 ;-)

Thanks, suggestion sent. Hope it will get through, i love the unit and a simple MUTE on a track would be fantastic, heck even just selecting what channel to monitor would be perfect.

Thanks Rick, i own both the 70d and dr680 (and a 633) and it would have been a nice addition for a super small backup/stealth unit. Anyway, a question to Tom Duffy: will the 70d have a firmware upgrade to have monitoring similar to the new 701d (being extremely similar in design)?

The first two on the list are from an italian dealer so you have to add IVA (VAT) that is +22% on that amount

Is there a way to MUTE a track on the DR70? Would love to use a tentacle lockit on ch4. As far as i can see on the manual there are only pan settings but no mute function

On the tx side (UM200C) how much gain are you using?

Thanks guys!

Hi, i'm resuming this post just for the title (so i don't make a duplicate one). What are your impressions on the aforementioned AKG Blueline SE300B with capsule CK94? Is a good budget solution to start into ms recording? It would be cost effective for me as i already have access to some blueline preamps

If i remember correctly one of my 815s have a similar issue, let me check and get back to you tomorrow (haven't used them in ages)

Ciao Stefano. I'm using the petrol one (PS605) and i'm happy with it! A lot of people here use versaflex ones. I had to tinker a bit to make it comfortable but i'm happy with it.

No i just read the specs on their fundraising campaign page Only downside to me seems a lack of locking connector, but what the heck sure is a neat little product! Here is a copy/paste for reference Tentacle Sync Hardware: Super Simple Usage: DIP-Switchless operation, no screwdriver needed! Just one button and LED. Setup of Framerate, TC Output-Level over USB via software possible (OSX & Windows). Integrated hook surface on back for easy mounting Super Small (34x50x16mm) and Lightweight (30g) Generates all SMPTE timecode-rates: 23.98, 24, 25, 29.97, 29.97DF and 30 FPS with an inaccuracy of less than 1 frame in 24hrs. Can act as a Master-Clock (Green Mode) or Jam-Sync to any external timecode source (Red Mode). DSLR-Ready: Switchable mic/line output + build-in microphone for reference sound High quality built-in rechargeable Lithium Polymer battery with running times of up to 40hrs. Charging over USB takes only 1.5hrs. Battery life will be more than 3 years (depends on usage) and there will be an option to replace the battery.

If i'm reading correctly this will add ltc to a, let's say, 5D AND still getting ref sound with a built in mic... Neat! We already ordered a set! DSLR-Ready: Switchable mic/line output + build-in microphone for reference sound

As others confirmed the wiring is correct, as specified in lectro manuals as "2 WIRE ELECTRET MIC POSITIVE BIAS". The adapter works fine. I can now say the gain drop is supposedly coming from faulty mke2s connectors (sennheiser seem to have wired those mics differently over the years, 2 wires, 3 wires, etc). Other mics were not affected.

Hi all, i'm currently making some adapters to use Sennheiser Evolution terminated mikes into Lectrosonic tx. Yes i've RTFM ;-) of both lectro and senny and cabled as this: SLEEVE and RING to pin one TIP to pin three Jumped pin 2 to pin 4 Pin 5 is unconnected Now i'm noticing a huge drop in gain from the mikes... i need to crank the gain to maximum to get proper levels from my UM200C. Can anyone please confirm that the pinout is correct?

"When you do things right people won't be sure you've done anything at all" Sent from my GT-I9300 using Tapatalk

Actually i did it but regret it... i should add a connbox because now i'm getting all sorta noises from the connector of my ktek coiled

They sell separately a holder that really cut the weight of the whole thing http://www.rodemic.com/accessories/blimp_mount Now if only there was a way to install lyres on it... (i mean on the v1 of the rode blimp... damn rode doesn't sell spares for v1/v2)

I know i'm going off topic but.. One quick question: who used or came up with the pseudonim Mike Rustle in adult movies?

How much does the battery last on your keyboards? My newly Rii RT-MWK01 drained after just one day of use, just want to check if mine is faulty or if that is normal.. I turned it on only between scenes to make notes and immediately turned it off