.png.279748a58a2b862b7aa5f3b84126e232.png)
Equipment
Board provided for discussions about equipment
9,581 topics in this forum
-
- 2 replies
- 915 views
Available in two sizes/thicknesses, both with and without vampire clips. Lower-profile size also works with round lavs btw 5.5mm and 7mm. $8.50 without vampire clip $20.95 with vampire clip So I guess these are like a Sanken RM-11 mount but for EMW, TRAM, DPA, OSC, etc. A couple pix: Fore more pix, info, ordering link: http://www.lmcsound.com/products/c-mount.html http://www.lmcsound.com/products/c-mount-tr.html I'm going to order a few to try out...
Last reply by Jim Feeley, -
- 8 replies
- 915 views
Again I seek your knowledge, since my searches have proven unfruitful. Will a um400 tx work with a ucr211 rx? I've got both sitting in front of me along side a um200c tx. The 200's work together, but the 400 appears to the 211 with no pilot tone, and no audio output. Blocks and frequencies are all checked. Any ideas?
Last reply by JonG, -
- 1 follower
- 2 replies
- 914 views
Some of my stuff were stolen in Rio De Janeiro Brasil on the past 23/11/2016 just in case .... Recorder AETA 4Minx ( 8 Track w/ ambient TC) Serial Number 126 Sound Devices 302 , serial: 400809176000 UHF Audio-Technica ATW-R1810 serial: 08140061 UHF Audio-Technica ATW-R1810 serial: 07510919 UHF Audio-Technica ATW-1801 serial: 08020415 UHF Audio-Technica ATW-1801 serial 09030094 Petrol bags modelo PEGZ-2 serial: 08013b sennheiser modelo hd 25-1 70O S/N,? Lectrosonics UM200C UCR210D serial: 10831/804 Lectrosonics UM200B UCR210D serial: 2440/803 2 tentacles 150255481176 150255481115 thanks........
Last reply by Rafael, -
- 1 follower
- 8 replies
- 914 views
Hi all Not exactly a location sound question but in a way, it is. We recently landed a high end live stream corporate gig. Client has requested us to have dozens of potential applause sound sample on-line and ready to go for one of the presenters. There will be a large audience viewing this live stream remotely, on Zoom (Yes, I know, terrible broadcasting platform). We will have our Allen & Heath SQ5 on site, hooked up to our VMix live streaming system via Dante. I could use some recommendations on how you would implement and integrate these applause sound effects into our workflow. Is this an iPad app that allows for the sfx to be triggere…
Last reply by Bouke, -
- 1 follower
- 3 replies
- 914 views
AES42 users, What boom pole cable do you use? Would regular 12ft Loon Boom be short enough for trouble free AES42 operation. Or do I need 110ohm AES cable? If so where can I find coiled AES cable? Thanks
Last reply by RadoStefanov, -
- 6 replies
- 914 views
Hi, I'm buying a DPA lavalier, model 4061, to use it with a lectro transmitter, LM. I didn't find on the dpa site the reference of the exact adapter. To this moment this is the closest suspect: the DAD3056, http://www.dpamicrophones.com/en/products.aspx?c=Item&category=138&item=24115. Although it is made for the 4063 and the 4067, not the 4061. Could anyone shine a light on this matter? Are there any good alternatives for the DPA official adapter - which I personally find quite expensive?
Last reply by Boomboom, -
- 5 replies
- 914 views
The producer from a shoot I was recently on needs to know what the replacement cost is for a couple of the shelves on my PSC cart. If someone here knows, please let us know. I missed out on talking to a vendor this week, and hope to get an answer on a Saturday. Thanks, Dave Schaaf
Last reply by studiomprd, -
- 2 replies
- 914 views
Just a reminder we are open for repairs. Also if your spouse is a Nurse or first responder we offer discounts. Factory authorized www.lectrorepair.com
Last reply by LarryF, -
- 3 replies
- 913 views
Hi friends, I could use your advice. I have an SD744t and a MixPre-D. For mics I have a Rode NT4, an Usi stereo pair, 2 JrF contacts, 1 JrF hydro, and 1 Aquarian hydro. I'm going to north Australia (Cape Tribulation) in July and want to record mainly ambiances of the rainforest and beach the sound of a cassowary yelling at me I'm wondering what gear you would bring on a trip like this, so that I may consider upgrading or investing, Since I'd prefer to stay away from the Cassowary's deadly claw, I'm thinking maybe Tellinga parabolic system. Alternately I could maybe find an animal specialist that could work with me to find one and get the sou…
Last reply by The Immoral Mr Teas, -
- 5 replies
- 913 views
Hello All, I'm debating whether I move to 788 or Deva Fusion from my Fostex DV824 soon. Can anyone tell me if the Deva Fusion mirrors with an external DVD burner via the firewire or is it something that writes after each take? Charlie Slemaker
Last reply by Brent Lestage, -
- 7 replies
- 913 views
Just a simple question for all of you. Is your audio feed to video assist allways a mono feed? I have a customer asking for a specific function from one of our mixers and I want to be sure to have his/your needs covered in the future. Thanks Ron Meyer Professional Sound Corp
Last reply by old school, -
- 1 follower
- 3 replies
- 913 views
Hi guys, Wondering if anyone has any experience using the Shure MX393/O boundary mic? http://www.shure.com/americas/products/microphones/microflex/mx392-mx393-microflex-boundary-microphones Here's the situation: A few months ago I worked on a shoot in a classroom with about 15-25 students. Two camera's, one wide, one on close ups. It was an ESL class, so students with varying degrees of confidence with the English language. The class proceeded as normal (ignoring the cameras) with a lesson and then student/teacher interaction. Of course, the teacher was wired, but the students all had to be boomed. The issue became that to hear some of these shy kids, …
Last reply by chrisnewton, -
- 8 replies
- 913 views
Hi all, A friend just gave me an old wireless pair and I can't find any info on it at all. They are labelled as being in 473.6 MHz. Any info for the sake of curiosity would be appreciated. The picture below is of another one of these units that turned up at Gotham some time ago. Thanks Richard
Last reply by mikewest, -
- 5 replies
- 912 views
there is many user saying that nomad (old version can be upgrade to new version) ,But no official notice in website , except Gotham Sound have a post. Trew , pro sound....... never have it on web. IS it true Anybody already upgrade to new version ? IT seems Tricky Jacky This was just posted a few minutes ago at JWsound Hello Boys and Girls! As you may or may not have heard there have been a few changes to the Nomad line from Zaxcom. The Nomad 4 will now become the Nomad Lite The 6 and 8 will be upgradable to the 10 or 12. Nomad 4 to Nomad Lite - $95* Nomad 4 to Nomad 10 - $950 + $300 upgrade fee Nomad 4 to Nomad 12 - $2,095 + $30…
Last reply by joinwooHK, -
- 6 replies
- 912 views
Are Tentacle timecode syncs reliable generators when jam synced in a multi-camera shoot? Will the timecode keep if all other cameras are hard wired to the source?
Last reply by nbongabong, -
.thumb.jpg.b62d3b0667e4ee0fd0c7f8e5d8c15591.jpg)
- 2 replies
- 912 views
Was just curious if anyone uses the antenna outputs on the Venue for their TV tuner. I know these outputs are supposed to be "tuned" for the specific block (21-22 for me), but does it make that much difference for Modulus/Canatrans reception. Will it affect my wireless mic reception? Don't want to try it out and then mess up something inside the Venue. Thanks in advance, Robert
Last reply by DWsoundservice, -
Qifb Issue
by azw- 1 follower
- 5 replies
- 912 views
My Qrx100 QIFB just lost all QIFB functionality. Mid-shoot. Receiver works fine but zero IFB now, zero zaxnet control. Updated firmware after wrap but still no IFB menu at all. I’m in a bind. Any ideas other than the ifb board just gave up the ghost? Any rental houses used in New Orleans (I’m landing in the evening) that can help fill the gap with an ifb100 or ifb200? Planning to call Zaxcom monday morning. Help! Avi
Last reply by azw, -
- 1 follower
- 5 replies
- 911 views
Who makes the best quality P-Tap socket ? I've tried various different ones and I find they are all pretty fragile. Or does anyone have any tips for a better way to assemble them ? I've gone through quite a few and none of them last much more then a few months without them coming loose.
Last reply by Jon Gilbert, -
- 1 follower
- 4 replies
- 911 views
Hello All, I have posted some information relating to storing complete configurations to CF card and disk, that Deva and Fusion users may find very valuable: http://www.trewaudio.com/products/zaxcom/deva_cool_things1/. Regards, Glen Trew
Last reply by Glen Trew, -
- 3 replies
- 911 views
Anyone use the the mini, how do you like it?, They sell the 5ft extender for it that they describe as being quick and easy to add on. Anyone use that or try it? Definitely need over 11ft on a lot of shoots, but would love to own the 11ft mini and whack the 5ft extension as needed if the performance is similar to the QS 17 footer. Appreciate any experience with them :-)
Last reply by Prahlad Strickland, -
- 2 replies
- 910 views
I'm wondering... A couple of things really, since you can select which tracks to record in the Deva, if I select track 1mix, track 2 as safety, track 4 wire and track 8 wire. Do they come up as track 1234 in telecine and post ? I also remeber reading something once about Avid or Protools not being able to read odd numbered files, like 3,5, and 7 tracks. Is this still true? thanks, Larry
Last reply by larry long, -
- 1 follower
- 1 reply
- 910 views
I am using all MM400 TX now and have polled a number of people off group and want more feedback, I have found that RED Band Countryman B6 is the best choice for all situations with MM400 With the Sanken cos-11 I have found that I tend to reach for regular type about 60% of the time and RED Dot rest of the time. I don't like the noise floor of mm400 if I have to turn in up past 11 ( 40%) with a softer spoken person on a RED Dot What are most of you using with MM400?
Last reply by LarryF, -
- 0 replies
- 909 views
Hi Im in the market for a camera mounted stereo shotgun and I am considering the Sanken CMS-10. It looks really cool and apparently its more weather resistant than the audio technica. However there are no reviews on the internet about sound except for a couple murmurs about a high noise floor. Has anybody used this or owned it? Im very curious. Id like to mount one on my FS7 camera. Thank You
Last reply by dolcevision, -
- 5 replies
- 909 views
So, my 744T is on the way, and I'm looking at my work flow, which using an HD-P2 was simply removing the card, inserting it into a USB reader on my EeePC and renaming files, prior to backing them up on an external drive. The Eee doesn't have Firewire, google shows me a few cables that claim to convert USB to Firewire and vice versa, anyone used them with any success? Any other ideas? See my other thread in the workflow forum if you're a 744T user with who can help on another issue!. Thanks in advance
Last reply by Jon Gilbert, -
- 3 replies
- 909 views
Hi Guys I'm off on a trip to Morocco soon where I haven't been before and wondered if anyone who's been there has used either Audio Ltd 2040's on Ch 38 or Audio Ltd 2020's on Ch 69 and if they were fine or any problems? Not sure where it is we are going yet and its a normal doco job so cant imagine more than a couple of radios at a time. Thanks for looking.
Last reply by workingsound,
